Repairs and maintains most types of substrate and trim. Excellent for use on roof and trim lining, upholstery and backed carpet. Suitable for paper, card, fabric, foam and other similar materials or onto metals and ceramics, glass and wood.

Safe to use on car paintwork, metal, glass and plastic. Brush onto affected area, leave for a minute or two, then rub until glue is dissolved. Ideal for removing leftover glue residue, stickers and other adhesives. Removes tar from surfaces. Can be used with the Sealey Model No. RE105 Hot Glue Paintless Dent Repair Kit.

For ease of assembly and creates gastight exhaust joints. Suitable for use with Model No. AK3901 Caulking Gun.

A low strength thread lock for all types of metal threaded fasteners. Prevents fasteners loosening due to vibration and seals against leakage, whilst still allowing easy disassembly of treated parts. Fills gaps up to 0.5mm.

A low strength thread lock for all types of metal threaded fasteners. Prevents fasteners loosening due to vibration and seals against leakage, whilst still allowing easy disassembly of treated parts. Fills gaps up to 0.5mm.

A medium to high strength nut lock for all types of metal threaded fasteners. Can be used on plated parts up 50mm.

A medium to high strength nut lock for all types of metal threaded fasteners. Can be used on plated parts up to 50mm.

High strength stud locking adhesive for all types of metal. Rapid fixing time of 15-20 minutes on normal plated, oiled metal surfaces and fixtures. Works on steel, aluminium, stainless steel and zinc.

High strength stud locking adhesive for all types of metal. Rapid fixing time of 15-20 minutes on normal plated, oiled metal surfaces and fixtures. Works on steel, aluminium, stainless steel and zinc.

Radically reduces the time adhesives and super glues take to cure. Ideal for large gap fills up to 0.4mm and porous material that are ordinarily troublesome to glue. Can be used on MDF, wood, glass, metal and most plastics.

Radically reduces the time adhesives and super glues take to cure. Ideal for large gap fills up to 0.4mm and porous material that are ordinarily troublesome to glue. Can be used on MDF, wood, glass, metal and most plastics.

A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

Non-drip thick gel adhesive that sets fast. Perfect for vertical repairs and porous materials. Bonds materials such as metal, rubber, plastics and wood in seconds.

Non-drip thick gel adhesive that sets fast. For vertical repairs and porous materials. Bonds materials such as metal, rubber, plastics and wood.

A high viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

A high viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

For the bonding and repair of most metals. Great for forming and repairing metal housings and sheet steel. When fully cured can be filed, drilled, tapped and painted.

Hand-kneadable, non-rusting, steel reinforced epoxy putty. Steel stick repairs or rebuilds anything made of metal*. Once cured it can withstand temperatures of 121°C. *Excluding aluminium.

A clear drying, slow setting and solvent-free epoxy adhesive. Workable for twenty minutes. Joins a huge array of materials, metals, most plastics, fibreglass, stone, ceramics and wood. Once cured, it can be machined, sanded and even painted.

A clear drying, fast setting highly reactive epoxy adhesive. Starts to hold in just 5 minutes. Suitable for bonding metal and metal alloys, most plastics, fibreglass, stone, ceramics and glass etc. Creates an excellent waterproof and impact resistant bond.

Methyl Methacrylate Adhesive, especially suited to bonding a wide variety of dissimilar materials including metals, plastic, carbon fibre and wood. Rapid cure adhesive, working time 4-6 minutes, fixture time 12-15 minutes. High tension strength, resistant to sheer, peel weathering, solvents and impact stress. Widely used in automotive, aerospace, marine, electronics and transport industries.

Spare mixing nozzles for SCS500 Rapid Set MMA Adhesive. Thoroughly mixes both components of the MMA Adhesive. Wastes less material than mixing components by hand.

An instant seal at low pressure. Used for fine and coarse threads up to 75mm(3") in diameter. 60 Hours to fully cure, which allows time to realign joints. Contains PTFE which seals against oils, gases and chemicals. Tear and shred resistant. Supplied in a concertina applicator.

Immediate low resistance on assembly and cures once confined in the absence of air in close fitting joints. High oil resistance with water and glycol tolerance. Supplied in an easy-to-use concertina applicator.

Gasket sealant to replace original gaskets. Used as an adhesive to bond metal, rubber and glass etc. Supplied in a flow controllable power can. Temperature range -50°C to 180°C.

Retains bearings, even under high rotational loading. Keeps full strength with no fatigue under load stress and has low corrosiveness.

Retains bearings, even under high rotational loading. Keeps full strength with no fatigue under load stress and has low corrosiveness.

Designed for cylindrical fitting parts. Cures once confined in the absence of air in close fitting joints.

Designed for cylindrical fitting parts. Cures once confined in the absence of air in close fitting joints.

Two part (adhesive and clear filler powder) repair system with unique reinforcing and filling feature. Cracks, holes and gaps can be repaired so that the damaged area is taken back to original shape/profile. Designed to bond rubber, copper, steel and aluminium, as well as most plastics. Rapid solidification and strong cohesive force allows speedy repairs - under 30 seconds and you can move on to next stage of the repair. Once fully hardened the filler can be ground, filed or sanded down, if required. Finished surface can be painted or coated to match surrounding area, or the process repeated if further filling is required.

Two part (adhesive and black filler powder) repair system with unique reinforcing and filling feature. Cracks, holes and gaps can be repaired so that the damaged area is taken back to original shape/profile. Designed to bond rubber, copper, steel and aluminium, as well as most plastics. Ideal for bumpers, fairings, distributor caps and is heat resistant enough for use on engine casings. Rapid solidification and strong cohesive force allows speedy repairs - under 30 seconds and you can move on to next stage of the repair. Once fully hardened the filler can be ground, filed or sanded down, if required. Finished surface can be painted or coated to match surrounding area, or the process repeated if further filling is required.

Two part (adhesive and grey filler powder) repair system with unique reinforcing and filling feature. Cracks, holes and gaps can be repaired so that the damaged area is taken back to original shape/profile. Designed to bond rubber, copper, steel and aluminium, as well as most plastics. Ideal for bumpers, fairings, distributor caps and is heat resistant enough for use on engine casings. Rapid solidification and strong cohesive force allows speedy repairs - under 30 seconds and you can move on to next stage of the repair. Once fully hardened the filler can be ground, filed or sanded down, if required. Finished surface can be painted or coated to match surrounding area, or the process repeated if further filling is required.

Two part (adhesive and white filler powder) repair system with unique reinforcing and filling feature. Cracks, holes and gaps can be repaired so that the damaged area is taken back to original shape/profile. Designed to bond rubber, copper, steel and aluminium, as well as most plastics. Rapid solidification and strong cohesive force allows speedy repairs - under 30 seconds and you can move on to next stage of the repair. Once fully hardened the filler can be ground, filed or sanded down, if required. Finished surface can be painted or coated to match surrounding area, or the process repeated if further filling is required.

Combination kit featuring the most popular adhesives and sealants, including thread, nut and stud lock, quick set metal and epoxy, super glues along with gasket and air/brake line sealants. Ideal for the workshop or mobile engineers and mechanics. Supplied in a tough storage case.