Simple, lightweight solution to fitting driving lamps or LED light bars to the front of a vehicle. Manufactured from lightweight aluminium and incorporating a 32mm alloy bar. Enables lights to be fitted above numberplate. Ensure that the bracket is securely attached to the vehicle and is capable of supporting the lamps. Make sure the numberplate is clearly visible and not obscured by the lamps or fittings.

Space-saving cube design. Suitable for garage, workshop and office applications. Features 2 x 5V (2.1A) USB sockets and 4 x 230V sockets. Fitted with 3-pin heavy-duty plug. Supplied with bracket, suitable for mounting under desks (covers one socket).

Space-saving cube design. Suitable for garage, workshop and office applications. Features 3 x 5V (2.4A) USB sockets and 3 x 230V sockets. Fitted with 3-pin heavy-duty plug. Includes wireless charging pad (5W) suitable for any wireless charging enabled device.

Extension cable fitted with 16A 110V plug and single 110V socket with protective end cover. Conforms to BS EN 60309.

Extension cable fitted with 2P+E plug and socket connectors rated at 230V 16A with protective end cover. H05VV-F 3G 1.5mm² Section cable. IP44 Rated.

Extension cable fitted with 13A 240V plug and single 230V socket.

Extension cable fitted with 16A 110V plug and single 110V socket with protective end cover. Conforms to BS EN 60309.

Extension cable fitted with 32A 110V plug and single 110V socket with protective end cover. Conforms to BS EN 60309.

Suitable for garage, workshop and office applications. Features 2 x 230V sockets and 2 x 5V (2.4A) USB sockets. Fitted with 3-pin heavy-duty plug.

Suitable for garage, workshop and office applications. Features 4 x 230V sockets and 2 x 5V (2.4A) USB sockets. Fitted with 3-pin heavy-duty plug.

Digital inverter technology provides stable 'clean' output, making the unit suitable for use with sensitive electrical equipment. Automatically adjusts the engine speed to precisely match the load, which allows the generator to run quieter whilst increasing fuel efficiency and lengthening engine life. Electronic ignition and a light pull recoil for easy start-up. Electronic safety overload system. Easy to carry at just 8.7kg. Fitted with a 230V socket.

Digital inverter technology provides pure sine wave electric power suitable for use with sensitive electrical equipment. Lightweight, easily lifted and fully portable. Eco mode set-up allowing the generator to run quieter (60dB @7m), increase fuel efficiency (4L fuel tank will last 6 hours) and reduce emissions. Features light recoil start, fuel gauge, auto voltage adjuster, low oil alarm and electric circuit protector. Fitted with two 230V sockets and 12V DC 8.3A port.

Heavy-duty frame design provides full protection and portability. Suitable for running power tools and lighting units. Long running with up to 13 hours on a full tank. Fitted with two 230V 13A sockets. Powerful and reliable generator. Smooth running unit fitted with anti-vibration engine mounts. Features low oil warning light, overload protection and fuel gauge.

Heavy-duty frame design features two wheels and a large handle, these provide full protection and portability. Suitable for running power tools and lighting units. Long running with up to 11 hours on a full tank. Fitted with two 230V 13A sockets. Powerful and reliable generator. Smooth running unit fitted with anti-vibration engine mounts. Features low oil warning light, overload protection and fuel gauge.

Digital inverter technology provides pure sine wave electric power suitable for use with sensitive electrical equipment. Easily moveable with folded handle and sturdy wheels making it portable once on site. Eco mode set-up allowing the generator to run quieter (73dB LPA), increase fuel efficiency (8L fuel tank) and reduce emissions. Features both pull cord and switch start, auto voltage adjuster, fuel gauge sensor, electric circuit protector and ESC smart control allowing the speed of the engine. Fitted with two 13A sockets, 12V DC 8.3A port and 2 USB charging ports. Supplied with tool kit to access battery, funnel, connector and clips which can charge a 12V car battery.

Heavy-duty frame design features two wheels and a large handle, these provide full protection and portability. Suitable for running power tools and lighting units. Long running with up to 11 hours on a full tank. Fitted with 2 x 230V 16A and 2 x 110V 16A sockets. Powerful and reliable generator. Smooth running unit fitted with anti-vibration engine mounts. Features low oil warning light, overload protection and fuel gauge.

Heavy-duty industrial frame design provides full protection and aids portability. Suitable for running power tools and lighting units etc. Fitted with automatic voltage control which protects the unit and provides higher efficiency and a long running time of up to 10 hours on a full tank. Fitted with 12V battery charging outlet, 230V and 110V sockets. Powerful and reliable generator fitted with maintenance-free brushless alternator. Smooth running unit fitted with anti-vibration mountings. Low oil cut-out feature and fuel gauge.

Heavy-duty frame provides full protection and incorporates carry handles for portability. Suitable for running sensitive electrical equipment. Produces a clean AC current to match the load. Long running time - up to 8hrs on a full tank. Fitted with two 230V 13A sockets. Increased fuel efficiency compared to standard generators. Powerful and reliable inverter generator. Features oil warning light, overload indicator and sight glass to monitor fuel level.

Manufactured from a lightweight composite material. Two 0.5W bright white COB LEDs. Easily positioned on a 90° axis. Simple on/off switch or automatic setting, which switches the LEDs on when the PIR sensor detects movement. Suitable for garden sheds, garages or around the home. Requires 3 x AA batteries (not included).

200/150 Lumen clip light with auto-sensor built-in. Light is designed to be clipped to the supplied headband or to a cap. Features front directional torch and top spotlight with four settings including red light setting. Light easily flips up so you can alternate between lights quickly. Clip also features two magnets on the bottom enabling it to be used independently as a work light. Battery type: 3.7V Lithium-Polymer. Supplied with USB charging cable.

Hands-free LED spotlight. Features one high power 3W white LED for general use and two red LEDs, which can be used at night to help maintain night vision. Adjustable inclination to direct light source as required and adjustable headband. One switch features an auto-sensor to activate light with the wave of a hand and standard on/off switch. Other switch has four options - full, 50% energy saving mode, flash and red light.

Powered by 3.7V lithium rechargeable battery. Auto-sensor means once active, you can simply move your hand alongside the head torch to turn it on and off. IP65 Water resistant. The four modes include: full, 30%, red and flashing red. Inclination can be adjusted to better direct the light. 1200mAh battery with level indicator while charging.

Hands-free 3W COB LED spotlight with adjustable inclination to direct light as required. Main light features high, low and flash settings. Produces up to 200 lumens. Adjustable headband and foam brow pad for added comfort.

Hands-free head torch with adjustable 3W SMD LED spotlight to direct light as required. Automatic sensor turns on and off when you move your hand in front. Produces up to 125 lumens. Four lighting settings - full, 50% energy saving mode, flash and red light. Powered by a rechargeable 3.7V 1.2Ah lithium-ion battery. Supplied with micro USB charging lead.

3W SMD LED with adjustable inclination to direct light as required. Features optical zoom for dissipating the spread of light. Removable light with clip-on hat function. Adjustable headband and foam brow pad for added comfort. Push-button on/off switch.

5W COB LED Striplight along front of adjustable headband with 3W LED bulb on one side. Automatic sensor turns on and off when you move your hand in front. Supplied with USB Type-C charging lead.

Hands-free SMD LED spotlight with adjustable inclination to direct light as required. Features three settings - full light, low light or flashing. Adjustable headband and foam brow for added comfort. Supplied with micro USB charging lead.

Hands-free 3W SMD LED spotlight with adjustable inclination to direct light as required. Automatic sensor turns on and off when you move your hand in front. Alternatively can be overridden to stay on/off by push-button. Two brightness settings. Adjustable headband and foam brow for added comfort. Powered by rechargeable Lithium-Polymer 3.7V 1.5Ah battery. Supplied with micro USB charging lead.

Hands-free head torch with adjustable 5W SMD LED spotlight to direct light as required. Automatic sensor turns on and off when you move your hand in front. Two power options of full and a 30% energy saving mode. Powered by rechargeable 3.7V 2Ah lithium-ion battery. Supplied with micro USB charging lead.

Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%. Main light has one switch with 4-functions, on, flash, auto-sensor and off. Automatic sensor turns on and off when you move your hand in front. Rear of strap includes a red LED warning light which has 2-functions, flash or on, ideal for a cycling light. Adjustable headband and foam brow for added comfort. Powered by 3 x AA batteries (not included).

Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%. Main light has one switch with 4-functions, on, flash, auto-sensor and off. Automatic sensor turns on and off when you move your hand in front. Rear of strap includes a red LED warning light which has 2-functions, flash or on, ideal for a cycling light. Adjustable headband and foam brow for added comfort. Includes a battery charging level indicator. Powered by rechargeable 3.7V 2.2Ah lithium-ion battery. Supplied with micro USB charging lead.

3W COB + 1W SMD Rechargeable headlight with sensor function. Also includes 3 SMD LEDs producing 300 Lumens. Can also act as a separate mini worklight with magnet. 3.7V 1000mAh Li-Poly battery with 0.5m USB cable included. Charging and battery indicator capabilities. Maximum 4hr runtime using COB LED.

Hands-free 2.5W SMD LED head torch to direct light as required. Two power settings - high and 60% power with an output of 250/150lm. Green LED charge indicator. Extendable arms with foam pads for added comfort. Supplied with Type-C USB charging cable.

Single high power 1.8W SMD LED produces extremely bright, white light with an output of 216/100 lumens (high/low) and a working range up to 100m. Three mode push-button for high, low and off settings. Operating time 5/12 hours. Intrinsically safe for use in hazardous locations. Lightweight, tough and durable casing which will sustain high impacts and drops. Adjustable headband attaches to hard hat or head. Light angle adjustable by up to 90° to suit every situation. Built-in gas release vent. Battery compartment secured with screws to prevent inadvertent opening in hazardous area.

Innovative 3-in-1 worklight. Threaded interface enables user to change between 1000 lumen torch with sliding focus, 450 lumen worklight and a 300 lumen flexi-head. Features a power indicator on the switch and a magnet on the base for hands-free operation. Supplied in a presentation box with a high quality micro USB cable.

Powerful, precise and pocket-sized penlight. 1W COB gives extremely bright light with up to 50 lumen output. 3W SMD side light with up to 55 lumen output. On/off fingertip switch. Powered by 1 x AAA battery (not included).

Slimline pocket light for use in confined spaces. Inspection arm can be folded 180º for hands-free use. Super bright COB and SMD LED, 6000-7000k, 80+CRI. High-impact plastic housing with aluminium light and a strong magnet on the bottom. Rechargeable high quality 3.7V 700mAh lithium-ion battery with a charging time of 2.5hr. Flashing warning light when battery is low. Includes 1 LED indicator - flashes green for charging, continuous green for full charge. Charges via a USB Type-C lead. (Supplied with USB Type-C Cable).

Slimline pocket light for use in confined spaces. Inspection arm can be folded 180º for hands-free use. Super bright COB and SMD LED, 6000-7000k, 80+CRI. High-impact plastic housing with aluminium light and a strong magnet on the bottom. Rechargeable high quality 3.7V 700mAh lithium-ion battery with a charging time of 2.5 hours. Flashing warning light when battery is low. Includes 1 LED indicator - flashes green for charging, continuous green for full charge. Charges via a USB Type-C lead. (Supplied with USB Type-C Cable).

Slimline pocket light for use in confined spaces. Inspection arm can be folded 180º for hands-free use. Super bright COB and SMD LED, 6000-7000k, 80+CRI. High-impact plastic housing with aluminium light and a strong magnet on the bottom. Rechargeable high quality 3.7V 700mAh lithium-ion battery with a charging time of 2.5 hours. Flashing warning light when battery is low. Includes 1 LED indicator - flashes green for charging, continuous green for full charge. Charges via a USB Type-C lead. (Supplied with USB Type-C Cable).

SMD LED produces 270 lumens. Flexible head bends and holds position to allow bright illumination in confined spaces. Adjustable focus from spotlight to wide area by a push/pull action of the head. Features a magnet in the end for hands-free use. Powered by 3 x AAA batteries (not included).