Safely absorbs oils, fuels, water, coolant, solvents and non-hazardous liquids. Sits in place to catch drips and absorb leaks to keep workplace clean and safe. No granular material that can cause cross contamination. Diameter and holes made to fit 205L drum tops. Supplied as pack of five pads.

IBC spill pallet complete with a weathertight hardcover. Platform has an integrated 2L In-platform drip tray, ideal for containing minor spills and drips when dispensing, and large apertures for visual inspection of the main 1200L bund below. Double swing doors with three-point locking mechanism. Ample headroom for IBC mixers, funnels and pumps. Door vents for inspection and air circulation. Roof designed for quick rainwater run-off to the rear. Made from 100% polyethylene. Flat-pack shipping. Easy assembly.

Tubular steel construction with heavy-duty solid rubber tyres. Simple to use, slip the loading lip under the drum and rock the drum over. The curve of the frame allows the drum to roll the trolley onto its wheels ready for transit. Drum can be secured using chain supplied. Fitted with rubber hand grips. Heavier loads may require two person operation.

Heavy-duty tubular steel construction drum trolley. Ideal for moving full 205L drums easily and safely. Features spring loaded mechanism ensuring stability and control whilst under load. Fitted with four wheels for moving easily over uneven surfaces. Features bracing strap to ensure load is secure. Unit can lay flat to enable use as a stillage.

Allows safe storage of 205L drums in the horizontal position for quick dispensing of contents. Radiused frame helps up-end drums.

Allows safe storage of 205L drums in the horizontal position for quick dispensing of contents. Radiused frame helps up-end drums. Highly manoeuvrable on two heavy-duty rubber tyres and two castors. Fitted with rubber handgrip.

Polythene constructed tap with 3/4"BSP thread and neoprene washer.

Universal wrench suitable for opening a variety of drums. Made from a tough composite material.

Self-closing safety drum tap with brass plated zinc alloy body. Features built-in flame arrestor for dispensing flammable or non-flammable liquids. Steel handle can be padlocked closed. Fitted with 3/4"BSP thread.

Brass body and nickel-plated drum tap with hose tail outlet suitable for use with extension hoses. Fitted with 1/2"BSP thread and supplied with 3/4"BSP adaptor. Needs only half turn of handle to open or close tap.

Polyethylene drum tap with 2"BSP thread, fitted with EPT gasket. Features padlock hole, hanging hook for buckets and port for installing a sight glass. Large bore drains drums quickly and easily.

Polythene constructed drum tap with 3/4"BSP thread.

Zinc die-cast, turn tap with locking facility to prevent unauthorised access to drum contents. Rubber seal, suitable for most liquids normally stored in plastic and steel drums. 3/4"BSP inlet and outlet thread with hose pipe adaptor.

Easy and cost effective method of determining level of fluid in a 205L drum. Fitted with a 3/4"BSP thread which screws directly onto the smaller hole on 205L drums, leaving the 2"BSP thread free for installing pumps. Indicator face is marked from 0-210 litres. Unit is fitted with a water filled polyethylene float allowing the indicator to be used with a variety of fluids. Note: TP129 is not a precise measuring device, unit is for indication purposes only.

Rigid steel construction suitable for safe movement and storage of steel and plastic barrels. Cradle fitted with two, smooth-rolling, heavy-duty Ø150mm wheels and one Ø75mm castor. 2-Position handle locks upright or at 45° and features tools for five different drum caps and a metal drum tilting attachment.

Manufactured from hardened and tempered cast aluminium for increased strength. Designed to fit most 2"BSP and 3/4"BSP drum plugs.

Transport drums quickly and safely on four large metal castors. Wheel positioning ensures even weight distribution enabling easier manoeuvrability. Suitable for use with 205L drums.

Transport drums quickly and safely on four large metal castors. Wheels are strategically positioned for even weight distribution and fitted with handle for easy manoeuvrability. Suitable for use with 205L drums.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø56mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø64mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø69mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø58mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø61mm drum closure diameter fitting.

Lifts open or closed, loaded, steel drums with the aid of an overhead hoist. Keeps drum in vertical position reducing spillage. Heavy-duty steel construction. Suitable for use with 205L drums.

Simple mechanical feature allows drums to be picked up, relocated and released without leaving the driving position. Secures tightly to forklift arms using hand screws. Heavy-duty steel construction. Suitable for use with 205L drums.

Manufactured from heavy-duty steel with welded gripping hooks. Suitable for lifting 205L vertical steel drums with an overhead hoist. Hooks fit under the lip of the drum to provide a secure and stable lift.

Manufactured from heavy-duty steel. Fitted with automatic grip lock to ensure maximum grip is maintained over rough terrain. Features suspension system to ensure safety. Suitable for use with 205L steel drums. Unit attaches to most forklifts and is secured using two heavy-duty fixing bolts.

Less manual effort required as hydraulic ram clamps drum, then raises it off the ground for simple manoeuvring and relocation. Cradle is fitted with two smooth-rolling, heavy-duty wheels and one castor with brake. Suitable for 205L drums.

Ideal for manoeuvring, relocating and draining fully loaded drums. Lever handle raises drum in stages with fingertip operated locks. Adjustable for reach/leverage and clamp height. Clips on both sides hold drum secure in vertical or horizontal positions. Drum can be manually adjusted and held at any angle or, if contents need mixing, can be turned end-over-end. Fitted with two smooth-rolling, heavy-duty wheels and one castor with brake. Suitable for 205L drums.

Ideal for loading and unloading barrel bunds, vans and general drum handling when forklift is not available. Suitable for 205L drums. Foot operated hydraulics, side handles and smooth-rolling wheels aid handling and manoeuvrability.