Self-closing safety drum tap with brass plated zinc alloy body. Features built-in flame arrestor for dispensing flammable or non-flammable liquids. Steel handle can be padlocked closed. Fitted with 3/4"BSP thread.

Brass body and nickel-plated drum tap with hose tail outlet suitable for use with extension hoses. Fitted with 1/2"BSP thread and supplied with 3/4"BSP adaptor. Needs only half turn of handle to open or close tap.

Polyethylene drum tap with 2"BSP thread, fitted with EPT gasket. Features padlock hole, hanging hook for buckets and port for installing a sight glass. Large bore drains drums quickly and easily.

Polythene constructed drum tap with 3/4"BSP thread.

Zinc die-cast, turn tap with locking facility to prevent unauthorised access to drum contents. Rubber seal, suitable for most liquids normally stored in plastic and steel drums. 3/4"BSP inlet and outlet thread with hose pipe adaptor.

Easy and cost effective method of determining level of fluid in a 205L drum. Fitted with a 3/4"BSP thread which screws directly onto the smaller hole on 205L drums, leaving the 2"BSP thread free for installing pumps. Indicator face is marked from 0-210 litres. Unit is fitted with a water filled polyethylene float allowing the indicator to be used with a variety of fluids. Note: TP129 is not a precise measuring device, unit is for indication purposes only.

Rigid steel construction suitable for safe movement and storage of steel and plastic barrels. Cradle fitted with two, smooth-rolling, heavy-duty Ø150mm wheels and one Ø75mm castor. 2-Position handle locks upright or at 45° and features tools for five different drum caps and a metal drum tilting attachment.

Manufactured from hardened and tempered cast aluminium for increased strength. Designed to fit most 2"BSP and 3/4"BSP drum plugs.

Self-priming lever pump manufactured from galvanized steel with 14L reservoir. Features carry handle for ease of manoeuvrability and foot plate for stability while in use. 1.8m Delivery hose with angled spout. Drip opening/spout storage within bucket cover for tidy storage when not in use. Suitable for oils up to SAE 40 viscosity.

Steel construction self-priming lever pump. Fitted with heavy-duty wheels and gripped handle for ease of manoeuvrability. Features a 20L reservoir, 1.9m delivery hose and flow control tap with angled spout. Spout holder within bucket cover for tidy storage when not in use. Suitable for gear oil and fluids with similar viscosity.

Transport drums quickly and safely on four large metal castors. Wheel positioning ensures even weight distribution enabling easier manoeuvrability. Suitable for use with 205L drums.

Transport drums quickly and safely on four large metal castors. Wheels are strategically positioned for even weight distribution and fitted with handle for easy manoeuvrability. Suitable for use with 205L drums.

Composite pump assembly suitable for the syphoning of fluids including diesel, petrol, oil, detergents and pesticides. Not suitable for use with aggressive detergents and solvents. Supplied with two 1.3m transfer hoses and a 1.2m narrow bore hose for performing oil extraction through the dipstick tube. The pump may also be used on inflatables such as footballs and tyres - a 400mm hose and various clip-on connectors are supplied for this purpose.

Hand pump that fits 5L containers with a 38mm screw top. Features quick-fit nozzle. Mess and waste liquid eliminated. Suitable for a wide variety of viscous products, such as engine oil, coolant and detergents etc. Includes a set of three clear hoses; 80, 135, 590mm.

Brass constructed pump suitable for syphoning a variety of fluids including oils, coolants, transmission fluid, diesel and antifreeze. Fitted with removable neoprene end caps. Supplied with 1m x 6mm intake hose and 600mm x 12mm discharge hose. Ideal for draining gearboxes and differentials. Delivers approximately 100ml per stroke.

Cast steel body, suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Supplied with 2"BSP adaptor and is suitable for use on 205L drums. Delivers approximately 0.3L/revolution.

Cast steel body with machined bore and rotor. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Supplied with 2"BSP adaptor and suitable for use on 205L drums. Delivers approximately 0.2L/revolution.

Polypropylene rotary pump, specially fitted with Bakelite vanes for transferring AdBlue® as well as acids, alkalis, oils and other fluids of similar viscosity. Supplied with 1300mm polyethylene extension hose. Features 2"BSP connector suitable for use on 205L drums. Delivers approximately 0.35L/revolution.

Self-priming lever pump fitted with anti-drip nozzle, 2"BSP connector and dip tube to suit 100 or 205L drums. Suitable for oils, antifreeze, paraffin and other non-corrosive fluids. Approximately 330ml per stroke discharge. Optional 1200mm dip tube Model No. TP66/ACC.

Extension Tube for Model No. TP66 Self-Priming Heavy-Duty Lever Action Pump. Application: TP66.

Self-priming lever pump fitted with anti-drip nozzle, 2"BSP connector and dip tube to suit 100 or 205L drums. Added filter in pump to prevent any unwanted large particles getting into fluid system. Specially constructed with Viton® seals for transferring AdBlue®. 1" x 2m Hose for hands-free applications. Approximately 330ml per stroke discharge.

Self-priming pump with polypropylene body. Suitable for pumping gear-oil or other products with a similar viscosity. Includes 1.5m of hose and universal adaptor. Note: If the container you have will not accept direct mounting of Model No. TP67, order a Model No. TP67DT Trolley and a TP67/X Top Plate. The pump fixes to the top plate which in turn mounts onto the trolley and avoids the need to connect the pump directly to the container.

Fixing Kit for EP80 Gear Oil Drums for use with Model No. TP67 Gear Oil Transfer Pump.

Drum trolley suitable for use with Model No. TP67 Gear Oil Pump. Suitable for use where the pump cannot be attached directly to the gear oil container. Will also require the use of Model No. TP67/X Top Plate for mounting of the pump.

Steel barrelled, self-priming, lever pump. Supplied with 2"BSP adaptor and dip tube suitable for 25 to 205L drums. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 500ml per stroke.

Steel barrelled, self-priming lever pump. Supplied with 2"BSP adaptor and dip tube suitable for 50 to 205L drums. Suitable for oils, antifreeze, degreasers and other non-corrosive fluids. High flow unit delivers approximately 400ml per stroke. Supplied with two delivery nozzles, one standard swan neck and one acute angle with filter for removing impurities from fluids.

Heavy-duty steel barrelled, self-priming, lever pump. Supplied with 2"BSP adaptor and dip tube suitable for 25 to 205L drums. Fitted with non-drip spout and swivel handle. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 400ml per stroke.

Polypropylene lever pump with steel rod and dip tube, suitable for use with oils, antifreeze and other non-corrosive fluids. Features polyoxymethylene handle to prevent aggressive fluids melting the handle. Fitted with 360° outlet nozzle. Suitable for 205L drums. Delivers approximately 300ml per stroke.

Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home. 1L Capacity suitable for all engine oils, transmission fluids, brake fluids and general-purpose cleaners.

Heavy-duty steel barrelled, self-priming, lift pump. Supplied with adjustable 2"BSP adaptor and dip tube suitable for 25 to 205L drums. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 0.5L per full stroke.

Heavy-duty polypropylene construction lift pump. Manufactured with polyethylene parts suitable for transferring AdBlue®. Fitted with 2"Mauser and 2"BSP adaptor for use with 205L drums. Supplied with 1.36m discharge hose. Delivers approximately 250ml per stroke.

Heavy-duty cast steel body suitable for use with low viscosity products such as oils, diesel, antifreeze and other non-corrosive fluids. Supplied with 2"BSP adaptor and 3-piece dip tube suitable for use on 205L drums. Delivers approximately 1L/revolution, emptying a 205L drum in 3 minutes.

Made from high quality polypropylene and LDPE plastic, pump has a broad chemical resistance, including mild solvents. Acid resistant, caustic resistant, and resistant to chlorine based chemicals. Pumps soaps, cleaning chemicals, sanitisers, antifreeze, AdBlue®, battery acid and more. Supplied with adjustable 2"BSP adaptor and dip tube suitable for 205L drums. Features lift action operation which pumps on the way up as well as the down push, enabling a larger delivery per stroke. Supplied with a lock-on measuring bottle for effective pumping with no leaks or spillages. Pump also features a locking strap to prevent accidental operation whilst not in use.

Lever action pump specifically for use with AdBlue®. The dip tube extends from 350mm to 980mm to fit 100L to 205L drums or barrels, or 1000L IBC tank. Specially constructed with Viton® seals for transferring AdBlue®. 1.6m Delivery hose for hands-free applications. Approximately 500ml per stroke discharge. Can also be used with water, antifreeze, windscreen washer fluid or mild detergents.

Electric drum mounted pump designed for pumping diesel, AdBlue®, antifreeze, detergents, water and light oils up to a viscosity of 100cst. Fitted with built-in fuse for protection, with a silenced motor keeping noise to a minimum. Telescopic suction tube features a stainless steel filter at the base of the tube, preventing foreign matter from entering the motor. Pump housing features a convenient holder for storing the dispensing nozzle. Includes 230V mains adaptor and 12V battery clips allowing user to operate unit with whichever supply is available. Supplied with a 2"BSP adaptor, 2m hose and manual dispensing nozzle with spout.

6.5L Capacity device constructed from composite materials and suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1m extension tube. Uses probes to drain engine oil through the dipstick hole, and also features an internal float valve for automatic cut-off when unit has reached maximum capacity. Probes can be stored in the holder when not in use. Can also be used for draining fish tanks, basins and sinks. Unit can be tipped 90° for easier emptying.

9L Capacity device constructed from composite materials. Uses manual pump to generate vacuum. Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose. Uses probes to extract engine oil through the dipstick tube.

9L Capacity device constructed from composite materials. Uses manual pump or compressed air supply to generate vacuum. Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose. Uses probes to extract engine oil through the dipstick tube.

6L Capacity device constructed from composite materials and suitable for extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Features a controlled discharge function for emptying the unit. Also suitable for low viscosity fluids such as water. Supplied with Ø5.8, Ø6.7mm suction probes and a 1m extension tube. Uses probes to drain engine oil through the dipstick hole. Also suitable for draining fish tanks, basins and sinks.

Vacuum oil and fluid extractors constructed from composite materials and suitable for extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Features a controlled discharge function for emptying the unit. Also suitable for low viscosity fluids such as water. Fitted with wheels for manoeuvring around the workshop with ease, even when full. Supplied with Ø5.8, Ø6.7mm suction probes and a 1m extension tube. Uses probes to drain engine oil through the dipstick hole. Also suitable for draining fish tanks, basins and sinks.