Manufactured with professional grade, high performance AGM battery, produced in the USA and specially formulated to jump start vehicles. The only range of DEKRA approved emergency jump starters on the market. Supplied with automatic maintenance charger that features patented microprocessor controlled speed charging, with thermal runaway protection. This means that unlike other booster packs, the unit can be left safely on charge continuously ensuring it is always ready for use. Fitted with an isolating rotary on/off switch and features a two-function digital display showing the internal battery level and the vehicle battery voltage. Fitted with a 12V accessory socket and a single 2.1A USB port ideal for charging mobile phones or tablets. A fusible link integrated in the output cable provides surge and spike protection, preventing damage to delicate and sophisticated vehicle electronics, as well as the booster. The heavy-duty clamps are manufactured with a braided link between each jaw for maximum power transmission, whilst also being curved allowing easy access to awkward or hard-to-reach battery terminals. Easy cable and clamp storage ensure the unit is compact and tidy when not in use. Audible warning system (AWS) to advise operator if the unit has been turned on for too long without being connected to a battery and for reverse polarity.

Manufactured with professional grade, high performance AGM battery, produced in the USA and specially formulated to jump start vehicles. The only range of DEKRA approved emergency jump starters on the market. Supplied with an automatic maintenance charger that features patented microprocessor controlled speed charging, with thermal runaway protection. This means that unlike other booster packs, the unit can be left safely on charge continuously ensuring it is always ready for use. Fitted with an isolating rotary on/off switch and features a 2-function digital display showing the internal battery level and the vehicle battery voltage. Fitted with a 12V accessory socket and a single 2.1A USB port ideal for charging mobile phones or tablets. A fusible link integrated in the output cable provides surge and spike protection, preventing damage to delicate and sophisticated vehicle electronics, as well as the booster. The heavy-duty clamps are manufactured with a braided link between each jaw for maximum power transmission, whilst also being curved allowing easy access to awkward or hard-to-reach battery terminals. Easy cable and clamp storage ensure the unit is compact and tidy when not in use. Audible warning system (AWS) to advise operator if the unit has been turned on for too long without being connected to a battery and for reverse polarity. Features a direct ventilation system from the batteries, this is in place so if the unit was inadvertently attached to a 24V vehicle whilst in 12V mode, which would cause the batteries to ā€�gasā€™, the gases would be vented directly out of the casing via a ā€�Whistleā€¯ outlet, warning the user of a potential issue.

Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadvertent damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batteryā€™s state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicleā€™s on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.

Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadvertent damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batteryā€™s state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicleā€™s on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.

Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadvertent damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batteryā€™s state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicleā€™s on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.

Composite case with integral battery clip storage and carry handle. Suitable for starting 4-cylinder petrol or diesel engines up to 2L. LED Battery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L. LED Battery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L. Front panel displays internal battery charge level and includes an integral LED worklight. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.

Composite case with integral battery clip storage and carry handle. Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L. Two batteries connected in parallel give high peak and cranking currents. LED Battery condition indicators. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L. Front panel displays internal battery charge level and includes an integral LED worklight. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.

Composite case with integral battery clip storage and carry handle. Suitable for starting 12V vehicles with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L. Suitable for starting 24V vehicles with 6-cylinder petrol engines up to 3.5L and 6-cylinder diesel engines up to 3L. Two batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents. Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V. LED Battery condition indicators. Test button gives indication of battery condition. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting 12V vehicles with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L. also suitable for starting 24V vehicles with 6-cylinder diesel engines up to 3L. front panel displays internal battery charge level and includes an integral LED worklight. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic cut-off prevents damage to battery whilst charging. Inbuild MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.

Composite case with battery clip storage lugs and carry handle. Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 8L and 6-cylinder diesel engines up to 6L. 24V with 8-cylinder petrol engines up to 4L and 6-cylinder diesel engines up to 3L. Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator. Audible warning system for polarity protection. Positive cable fitted with protection against reverse charging from the vehicle. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with a power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking, and an integral LED worklight for use at night. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5Vāˇ“1A). Supplied with mains charger.

Composite hi-vis green case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5Vāˇ“1A). Supplied with mains charger.

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Also features an integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5Vāˇ“1A). Supplied with mains charger.

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Also features integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5Vāˇ“1A). Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 4-cylinder petrol or diesel engines up to 2L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.

High output sealed AGM battery with clamp storage and rope carry handle. Suitable for starting vehicles with 4-cylinder petrol engines up to 2L or diesel 1.6L. Front panel includes an integral LED worklight. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Single 5V 2.4A USB output. Supplied with mains charger. Durable case protects unit when stored.

Fully protected against reverse charging and overload. Compact, lightweight unit that also provides high amperage output. Capable of starting all 12V vehicles and up to 400-450hp, 12V; 5L Petrol/3.5L Diesel, 24V; 3L. As well as being light, Lithium-ion batteries have numerous advantages over lead acid, including a flat discharge curve. This ensures a greater and extended performance and holds the charge for up to five times longer with high energy density levels giving more battery power per gram. Includes an integral 3W worklight for use at night. Fitted with a 32000mAh @ 3.2V battery and two USB (5V/1A & 5V/2A) outlets, this unit can also supply up to ten full charges for smartphones and MP3 players or one full charge for your tablet/computer. Includes a 12V port to be used with accessory socket adaptor supplied and three mobile phone or tablet charging cables. The unit can act as a memory saver during vehicle diagnostics (also requires Model No. VS2073, for details see page xxx).

Powered by Lithium-ion technology and fully protected against reverse charging and overload. A dedicated 12V jump starter pack that benefits from being a compact, lightweight unit that also provides high amperage output. Capable of starting 12V vehicles up to a 4-cylinder engine. Also ideal for motorcycles. Lithium-ion batteries have numerous advantages over lead acid, including a flat discharge curve. This ensures a greater and extended performance and holds the charge for up to five times longer with high energy density levels giving more battery power per gram. Includes an integral worklight for use at night. Fitted with an 8000mAh battery and 5V USB outlets for charging devices such as smartphones and tablets.

Hardwired jump lead cables provide a permanent socket for use with Model No. SL65S, eliminating the need for tools to access the battery terminals. Used in conjunction with SL65S and other compact jump starters this is perfect for motorbikes with batteries under seats or behind panels. Watertight plug and insulated cables allow for permanent fitment. Features smart cable technology that monitors and protects against reverse charging.