This IBC connector works by screwing the valve open/closed without generating any angular pressure on the IBC connection point. Once connected, the SEC valve ensures that the AdBlue® is not contaminated by the surrounding environment of the IBC tank. Suitable for use with all Sealey AdBlue® pumps.

Robust rubber housing with integral digital electronic metering. Easy-to-read large, 4-digit, 28mm high LCD display calibrated in litres. Features flow rate indication. 1" x 1"BSP Male/Female fittings. Suitable for use with AdBlue®. Powered by 2 x AAA batteries (supplied). IP55 Rated protection.

Polypropylene constructed body and spout for durability. Designed for use with AdBlue®. Supplied with removable 3/4"BSP hose inlet. Suitable for use with Sealey AdBlue® pumps. Features a maximum flow rate of 60L/min.

Heavy-duty automatic AdBlue® nozzle manufactured from stainless steel. Fitted with micro-touch valve for instant shut-off when tank is full. Fitted with 3/4"BSP hose inlet. Designed and manufactured using AdBlue® compliant materials. Features a maximum flow rate of 60L/min. Suitable for use with AdBlue® pumps.

Specially designed AdBlue® funnel screws directly onto filler neck alleviating risk of spills. Unit is fitted with a manual internal valve which, when opened, allows fluid to pass through. Large capacity of 1.1L and fitted with a click close lid to keep dirt and debris out when not in use.

Specially designed AdBlue® funnel screws directly onto filler neck alleviating risk of spills. Unit is fitted with a manual internal valve which, when opened, allows fluid to pass through. Large capacity of 1.1L and fitted with a click close lid to keep dirt and debris out when not in use.

Hanging bracket and fixings to attach 12V and 230V fluid transfer pumps to 1000L intermediate bulk containers. Supplied with a delivery nozzle holder that can also act as a drip tray to catch any accidental spills. Can be used with most brands of fluid transfer pumps.

Bracket and fixings to attach 12V and 230V fluid transfer pumps to 205L barrels. Supplied with a delivery nozzle holder that can also act as a drip tray to catch any accidental spills. Can be used with most brands of fluid transfer pumps.

Manufactured from HDPE for the safe transportation and dispensing of AdBlue® when supplying on site equipment. Supplied with a 12V electric pump, 4m electric cable and clamps, security valve and a 4m delivery hose with dispensing nozzle. Can be safely secured and transported on an ATV, pick-up truck or van, using grooves for tie down straps. Not suitable for petrol or diesel.

Elbow connector for use with AdBlue® delivery systems. Connected by 1�BSP threads at both ends. Made from Polypropylene with Viton® seals.

Elbow connector for use with AdBlue® delivery systems. Connected by a 1�BSP thread and 3/4� barb at the other end. Made from Polypropylene with Viton® seals.

Manufactured from HDPE for the safe transportation and dispensing of AdBlue® when refilling on site equipment. Supplied with a 12V electric pump, 4m electric cable and clamps, and a 4m delivery hose with automatic fuel nozzle. Can be safely secured and transported on an ATV, pick-up truck or van, using grooves for tie down straps and six handles for positioning. Not suitable for petrol or diesel.

Polyethylene reservoir, 36L capacity, mounted on four castors for mobility. Drain pan, with filter, on height-adjustable down tube. Handgrips for manual emptying.

Die-cast pump head with air-bleed valve. 3-Way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

Highly durable cast iron pump head, features dual piston design for high-volume performance. 3-Way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Rubber gripped grease tube and handle for easy grip. Features variable stroke for controlled grease volume. Half stroke gives low pressure and low volume, full stroke provides high pressure and high volume delivery. Accepts standard 400g cartridges.

Robust, double arm grease gun with aluminium die-cast head. For use with screw-type grease cartridges, using vacuum suction to ensure full utilization of grease cartridge, as well as eliminating priming issues associated with conventional grease guns. Features a protective cap for hose storage preventing contamination. 1/8"BSPT Thread and supplied with adaptor to fit most screw-type cartridges on the market. Use with Model No's SCS107 and SCS108. Zinc plated lever handles and rubber ergonomic grips. Fitted with minimal wearing parts to ensure prolonged life and supplied with 300mm(12") delivery hose and 4-jaw coupler.

Highly durable die-cast aluminium alloy pump head with air-bleed valve. Fitted with an innovative quick release mechanism to speed up the refill process. Features 3-way fill with cartridge, bulk or manual capability. Supplied with a rigid delivery tube, push-on hydraulic 4-jaw coupling and contoured rubber pump handle. Accepts standard 400g cartridges.

Mini push-action hand greaser. Ideal for limited access areas or where smaller amounts of grease are required. Supplied with rigid extension tube and delivery nozzle.

Die-cast pump head. 3-Way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

3-Way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

Die-cast pump head with air-bleed valve. 3-Way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Accepts standard 400g cartridges.

For use with all brands of manual grease gun (not for use with power greasers). Dispenses a fine bead of grease. Long nozzle provides access for hard-to-reach areas. Ideal for lubricating constant velocity joints.

All-in-one set includes couplers, nozzles, adaptors and flexible hose. For use with all brands of manual grease guns. Ideal for automotive, agricultural, industrial and marine use. Supplied in storage case.

Mobile waste oil drainer for use with 25L or other suitable containers. Telescopic drain pan with filter grid and ball valve control. Arm fully adjustable in height and depth and fitted with locking nuts for pre-determined height selection. Heavy-duty design trolley with handle, two castors and two fixed wheels.

Manufactured with heat treated steel designed to withstand high pressures without deformation. Fitted with 1/8"BSPT female thread which enables this coupler to be used with multiple pieces of grease equipment, including manual grease guns, air grease guns, electric grease guns and bulk bucket greasers. Ingenious design enables this coupler to firmly latch onto the grease fitting enabling hands-free operation compared to standard grease couplers, meaning less wasted grease around the fitting. Fitted with a quick connect/disconnect lever which enables unit to be disconnected easily with up to 8000psi of pressure. Eliminates the issue of disconnecting a standard coupler from a pressurised condition, which often leads to broken fittings and damaged coupler jaws.

Air operated 1:1 oil pump, suitable for use with Model No. AK450DX oil drain unit. Supplied with a wall mounting bracket, 2m flexible hose with dry-fit male and female quick couplings to attach it to the drain unit. 2m Flexible air supply hose with filter, lubricator and regulator assembly is also included. The pump can be connected into a run of pipework to a waste oil storage point sited out of the workshop.

75L Reservoir and telescopic funnel fitted with grid filter. Fitted with female dry-fit coupling for connection to Model No. AK450DP Pump-Away Station. Includes full drum indicator.

Steel fabricated 65L reservoir and telescopic steel drain pan fitted with grid filter. Air discharge drain with hose. Fitted with reservoir oil level indicator tube.

Fitted with high efficiency 50:1 air motor. Workshop tested reliability. Supplied with safety regulator to prevent over pressurisation of pump unit. Fitted with a follower plate to prevent pump unit cavitation and ensure a smooth flow of grease. Includes SAE100R2AT rated grease hose, z-swivel, control valve and bucket trolley.

Fitted with high efficiency 50:1 air motor. Workshop tested reliability. Supplied with safety regulator to prevent over pressurisation of pump unit. Fitted with a follower plate to prevent pump unit cavitation and ensure a smooth flow of grease. Includes SAE100R2AT rated grease hose, z-swivel, control valve and bucket trolley.

Grease Control Valve with Z-Swivel. Suitable for Model No's AK452X and AK453X.

Suitable for Model No's AK452X and AK453X.

Solid steel pump and carry handle. Supplied with follower plate to prevent cavitation and ensure smooth flow of grease. Suitable for repetitive filling of high pressure low volume grease. Suitable for 12.5kg grease buckets. Includes rigid extension and 4-jaw coupler.

Zinc die-cast pump head with solid steel pump. High volume, low pressure output for filling auto chassis lubrication reservoirs. Central lube coupling supplied with spare plug-in adaptor.

Air operated 3:1 double acting pump for barrels or tanks with 2"BSP fittings. Pump is supplied with air management system and connected to a 940mm rigid suction probe with non-return valve. Features hose for attachment to digital oil meter (Model No. AK4565D supplied) or to optional retractable hose reel (Model No. AK4567D). Suitable for use with engine, hydraulic, synthetic, gear and transmission oils up to SAE150.

Mobile oil dispensing unit with air operated 3:1 double acting pump for barrel or tanks with 2"BSP fittings. Pump is supplied with air management system and connected to a 940mm rigid suction probe with non-return valve. Features trolley, 4m hose and digital oil meter (Model No. AK4565D supplied). Suitable for use with 205L drums and with engine, hydraulic, synthetic, gear and transmission oils up to SAE150.

Mobile oil dispensing unit with air operated 3:1 double acting pump for barrels or tanks with 2"BSP fittings. Pump is supplied with air management system connected to a 940mm rigid suction probe with non-return valve. Features trolley, 10m retractable hose reel (Model No. AK4567D supplied) and digital oil meter (Model No. AK4565D supplied). Suitable for use with 205L drums and engine, hydraulic, synthetic, gear and transmission oils up to SAE150.

Mobile oil dispensing unit with air operated 3:1 double acting pump for gear oil with 2"BSP fittings. Pump is supplied with air management system and connected to a 730mm rigid suction probe with non-return valve. Features 4m hose and digital oil meter (Model No. AK4565D supplied). Also suitable for use with engine, hydraulic, synthetic, gear and transmission oils up to SAE150 in containers up to 50kg.

Robust oil dispensing gun incorporating manual shut-off. Fitted with rigid extension, handle lock and non-drip nozzle. Please note that this gun is not approved for the resale of oil.

Robust oil dispensing gun incorporating digital meter, manual shut-off and tough rubber protection guard. Fitted with flexible extension and non-drip nozzle. Easy-to-read 5-digit LCD display with resettable individual or cumulative totals. Please note that this gun is not approved for the resale of oil.