Manually operated, bench mounting metal bender. Capable of producing radiused and angled bends in strips up to 50mm wide and radiused bends in round/square stock up to 16mm diameter/side.

Manually operated, floor mounting metal bender. Capable of producing radiused and angled bends in strips up to 50mm wide and radiused bends in round or square stock up to 16mm thickness.

Professional folding A-frame conduit bender with vice. Suitable for galvanized and black enamel conduit. Supplied with two machine cast formers - Ø20 and Ø25mm, which will bend conduit up to a maximum length of 1100mm. The vice aids cutting lengths and threading. Additional former for Ø32mm conduit available separately, order Model No. PCB32.03.

Ø32mm Cast former for use with a conduit bender.

12" 3-in-1 light sheet metal working machine. Can shear, bend and roll a variety of metals including mild steel, aluminium and copper. The rollers have grooves with diameters of Ø2.5mm, 3mm, 4mm, 5mm, 5.5mm and 6mm for bending rods. Adjust the distance and angle of the rollers to create the desired curvature for curves, cylinders or cones. Shear sheets of metal up to 305mm wide. Make pans with a maximum lip of 1" and bend (brake) sheets up to an angle of 90°.

30� 3-in-1 light sheet metal working machine. Can shear, bend and roll a variety of metals including mild steel, aluminium and copper. The rollers have grooves with diameters of Ø4mm, 5mm and 6mm for bending rods. Adjust the distance and angle of the rollers to create the desired curvature for curves, cylinders or cones. Shear sheets of metal up to 760mm wide. Make pans with a maximum lip of 1� and bend (brake) sheets up to an angle of 90°.