Copper lug terminal crimping tool, crimp range is 10-120mm². BS Standard type terminal. Manufactured from SCM-40 hard tool steel. Accurate bore diameter and good crimping effect.

Tests 6, 12 and 24V batteries. Composite body and rubber bulb for workshop durability.

Fluid transfer tool suitable for battery top-up and level adjustment of coolant and screenwash.

Professional battery hydrometer. Tests 6, 12 and 24V batteries. Float gauge and thermometer built-in. Tube construction with thermometer for temperature compensation.

Wire brushes remove corrosion build-up on battery posts and terminals for improved electrical contact.

Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact. Features clamp reamer and terminal scrapers.

Mini puller with spring loaded jaws designed for removal of corroded battery clamps from terminals. Also suitable for removal of small gears, pulleys and bearings.

Compact device which accurately tests battery, cranking and alternator. No heat, no sparks and no misdiagnosis. Just key in the battery rating from the top of the battery and results are displayed on an LED control panel. No internal battery and will test batteries with a residual charge of just 7V.

Compact device which accurately tests battery, cranking and alternator. Just key in the battery rating from the top of the battery and results are displayed on an LCD screen. Includes a facility to print results via PC. No internal battery and will test batteries with a residual charge of just 8V. Supplied with PC software and instruction manual in storage pouch.

Fast and accurate diagnosis of battery and alternator faults with facility to print the results. Large LCD display shows charging and starting system status and returns decision making information in seconds. Results need no interpretation and the tester will work on batteries with as little as 1.5V of residual charge.

Suitable for Model No. BT2012.V2, BT2015 and other leading brands of battery tester.

Tubular steel handle with comfort grip. Enables fast, safe handling of batteries. Fully adjustable for battery size.

Permits easy removal of freewheel pulley from alternator either on or off the vehicle. Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut.

Permits easy removal of over running alternator pulley either on or off the vehicle. Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut.

Enables easy removal of freewheel alternator pulley, either on or off the vehicle. Allows alternator shaft to be held while the pulley retainer is removed. Incorporates a complete range of combination TRX-Star*, spline and hex adaptors to fit most alternators. Supplied in storage case.

Comprehensive set for easy removal of freewheel alternator pulley, either on or off the vehicle. Allows alternator shaft to be held while pulley retainer is removed.

Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. Features LED to indicate back-up battery power supply status. Saves valuable time spent re-programming lost codes.

Used to preserve the memory to on-board electronics whilst vehicle's own battery is disconnected. Saves valuable time spent re-programming lost codes. Can be connected via the vehicle's EOBD or vehicle accessory power socket. Unit features an internal 12V 7Ah sealed battery and LEDs provide battery condition and charge indicator. Supplied with mains charger.