Suitable for Model No. SDL14 Plastic Welder.

Suitable for Model No. SDL14 Plastic Welder.

Suitable for Model No. SDL14 Plastic Welder.

Heat gun body is lightweight and easy to operate with maximum control and accuracy provided by pistol grip design. Repairs cracked plastic parts such as car bumpers. Three different heat modes, high/medium/low. Overheating / overload protection. High brightness LED light to illuminate work area. Kit comprises of staples; 0.6mm outside corner (x50), 0.8mm inside corner (x50), 0.6mm flat (x50), 0.8mm flat (x50), 0.6mm wave (x50), 0.8mm wave (x50), soldering iron tip (x1), heat gun (x1).

Soldering Iron Tip For SDL15.

Contoured Nozzle Set. Pack of 4.

Suitable for use in the bodyshop. The feathering action makes this blaster ideal for treating stone chips. Supplied with a set of four rubber nozzles for sealing the gun head to the panel and a 700g bottle of blasting grit. Replacement nozzles are available.

Accepts most popular types of 1L coating tins.

Accepts most popular types of 1L coating tins. Supplied with extended flexible nozzle for wax spraying cavities.

Unique disposable head and pick-up tube assembly means that you never need to clean your gun again - just throw away the head and tube every time. Saves time and mess. Supplied with wax injector probe.

Disposable Heads and Tubes for Model No. SG14D. Pack of 6.

Features air control valve, making it suitable for various applications. Supplied with canister and wax injection probe.

Designed for the application of wax rust inhibitor. Supplied with a selection of lances to enable the wax to be sprayed into body cavities through small access points.

Suitable for most brands of wax rust inhibitor. Supplied with nozzle for surface application and 910mm flexible probe for cavities.

Rechargeable 100lm spray gun light with a high Colour Rendering Index (CRI 90) suitable for accurate colour matching. Suitable for home or bodyshop use. Manufactured to fit most guns with its �25-45mm clamp. Ideal for low light areas such as vehicle chassis and interior where traditional booth lights do not reach adequately. Supplied with Type-C USB cable.

Heavy-duty triple gun stand, constructed from steel with painted finish. 60mm Wide hooks make this suitable for use with most gravity feed spray guns. Features an adjustable filter ring to make pot filling simpler.

Fully automatic operation - close lid to start and open lid to stop. Corrosion resistant tank suitable for containing water and detergent necessary for cleaning water based spray guns. Powerful and reliable piston pump system.

Fully automatic operation - close lid to start and open lid to stop. Corrosion resistant tank suitable for containing water and detergent necessary for cleaning water based spray guns. Powerful and reliable piston pump system.

Gravity feed spray gun using standard pressure which creates a flat and smooth fan pattern ideal to get the best clear finishing coats. Air cap engineered to provide 26psi of mist pressure for fast application and extended working distance. Greater efficiency than HVLP and less material wastage than conventional spray guns. MVMP technology and precision engineering delivers consistent and unrivalled results. Features air and fluid flow controls for fine adjustment of spray pattern.

Profile gauge for use when comparing a damaged panel to the original or for duplication of profile when preparing bodywork. Features lock to secure pins when comparing panel shape. Pins made from non-scratch PS plastic. Suitable for use on various flooring, tiling and metalwork.

A welder of exceptionally quality for fast, efficient body repairs. Removes dents quickly, without holes or the need to remove interior trim. Amazing pulling power - even on heavier gauge panels. Welds on washers and nails. Supplied in heavy-duty storage case.

Professional quality stud welder for fast, efficient body repairs. Removes dents quickly, without holes or the need to remove interior trim. No burn through means that removal of studs and washers is easy and preparation work before repainting is minimized. Suitable for use on steel or aluminium and can weld studs, washers and tabs. Patented quick puller attachment allows removal of smaller dents without the need for studs or washers. Supplied in heavy-duty storage case.

Made from aluminium/magnesium alloy. Suitable for Model No. SR2000.

Made from aluminium, magnesium and silicone alloy. Suitable for Model No. SR2000.

Electrode kit suitable for Model No. SR2000.

Pull washers suitable for Model No. SR2000.

Star washers suitable for Model No. SR2000.

Tabs suitable for Model No. SR2000.

Triangle washers suitable for Model No. SR2000.

Stud Welding Puller for use with tabs and washers. Adjustable legs have four profiles on the base for different size and shapes of dents. Threaded centre can also be pulled through for use on larger dent removal.

Tab Shooter for use with Model No. SR2000. Holds multiple tabs (Model No. SR2000.T) and loads them semi-automatically for fast and efficient use. Guide on side provides quick and easy alignment for next tab.

Superbly balanced spray gun suitable for applying finishing coats. Supplied with cam-action suction pot and fitted with air regulator control. Suitable for use with water based paints. Alternative set-up available separately.

Based on the popular Model No. SSG1 spray gun head and supplied with high capacity pressure pot with gauge. Bulk feed system holds up to two litres of paint per fill. Suitable for bulk/production spraying. Components of this set are also available separately. Supplied with 1.8mm set-up.

•Spray gun head suitable for use with Model No. SSG1P pressure pot spray gun. 3/8” BSP union fluid hose input connector. 1/4” BSP union air hose input connector. Supplied with 1.8mm set-up.

Pressure pot suitable for use with Model No. SSG1P/1 and HVLP-79/P1 pressure pot spray gun. 1/4” BSP union fluid hose input connector. 1/4" BSP union air hose input connector. Supplied with 1.8mm set-up.

Ideal for applying undercoat, adhesives and primers. Features adjustable paint flow and fan width controls. Supplied with aluminium screw-type suction feed pot. Suitable for use with water based paints. Alternative set-ups available separately.

Ideal for applying base coats. Features adjustable paint flow and fan width controls. Supplied with aluminium cam-action suction feed pot. Suitable for use with water based paints. Alternative set-ups available separately.

Ideal for applying undercoats, primers and adhesives. Features adjustable paint flow, fan width and air regulator controls. Supplied with composite gravity feed pot. Suitable for use with water based paints. Alternative set-ups available separately.

Ideal for applying undercoats, primers and adhesives. Features adjustable paint flow and fan width controls. Supplied with composite gravity feed pot. Suitable for use with water based paints. Alternative set-ups available separately.

Ideal for applying undercoats, primers and adhesives. Features adjustable paint flow and fan width controls. Supplied with composite gravity feed pot. Suitable for use with water based paints. Alternative set-ups available separately.