Ideal for applying undercoats, primers and adhesives. Features adjustable paint flow and fan width controls. Supplied with composite gravity feed pot. Suitable for use with water based paints. Alternative set-ups available separately.

Suitable for cleaning small areas such as wheels or chassis members. This gun will accept a variety of abrasives including sand, chilled iron grit and other proprietary types of beading.

Suitable for cleaning large areas, this gun will accept a variety of abrasives including sand, chilled iron grit and other proprietary types of beading.

For the professional bodyshop or valeting bay to accurately verify the thickness of paint and check for accident damage. Uses magnetic induction to provide accurate and consistent readings to 0.1�m. Suitable for steel and aluminium panels. Easy to calibrate with test plates and precision standards. USB Interface for downloading data to PC. Powered by 2 x 1.5V batteries (supplied).

Ideal for the showroom, bodyshop and valeting bay to accurately verify the thickness of paint and check for accident damage. Uses magnetic induction to provide accurate and consistent readings to 0.1mm. Suitable for iron, steel and aluminium with non-magnetic coatings including paint, enamel, plastic and epoxy. Displays measurement in mm. Powered by CR2032 3V battery (supplied).

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Crutch supports adjustable for height and overall width. Fitted with four �90mm locking metal castors.

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Adjustable frame allows you to change the length and width as required. Three types of height-adjustable and interchangeable supports, rubber support pads, shallow and deep crutches. Fitted with four �200mm nylon locking castors.

Pressed steel wheel dolly with four �90mm metal castors. Handles tyres with a width up to 355mm. Suitable for use in bodyshops and workshops.

Steel chassis with PVC rollers and four �100mm nylon swivel castor wheels. Capacity: 560kg. Maximum Opening: 595mm. Maximum Tyre Width: 300mm. Note: Sold as singles, but must be used in pairs.

Steel chassis with pedal operated mechanical lifting action. Skate sits on easy-rolling Ø100mm nylon castor wheels. Composite rollers cradle vehicle’s tyre and are capable of handling up to 240mm widths. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface. Note: Skates sold as singles, but must be used in pairs.

Steel chassis with PVC rollers and four Ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Rollers cradle vehicle’s tyre and are capable of handling up to 270mm profiles. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface. Note: Skates sold as singles, but must be used in pairs.

Steel tube chassis with four Ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profiles. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface. Note: Skates sold as singles, but must be used in pairs.

Heavy-duty steel plate with rust resistant finish. Fitted with four �75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm widths. Suitable for use in bodyshops and workshops.

High powered unit for use with both air and standard power tools. Certified for M-Class dust extraction in accordance with EU directives, protecting the operator from dust particles hazardous to health. Supplied with Random Orbital Air Sander �150mm, Sanding Block 70 x 120mm, Sanding Block 70 x 198mm, �36mm flexible hose, multi-diameter tool adaptor, crevice tool, power tool cord clamps, M-Class bag filter, M-Class cartridge filter and foam filter. Fitted with self-cleaning filter designed to prevent filter blockages. Variable speed control lever for quick adjustment to suit workpiece.

High powered unit for use with power tools. Certified for M-Class dust extraction in accordance with EU directives, protecting the operator from dust particles. Supplied with Electric Palm Sander �150mm 350W/230V, Sanding Block 70 x 120mm, Sanding Block 70 x 198mm, �36mm flexible hose, crevice nozzle, multi-diameter tool adaptor, inserts for liquid collection and hard floors, cord clamps, M-Class bag and cartridge filters and foam filter. Set to continuous suction or synchronise with a power tool via a 2000W rated, electronically controlled outlet. Fitted with a self-cleaning filter designed to prevent blockages.

Slide hammer kit with 2.04kg sliding weight. Comfortable rubber grip handle for added control. Supplied in storage case with attachments.

Heavy-duty slide hammer with 4.4kg sliding weight. For use on body panels and vehicle chassis. Supplied with various attachments in a tough storage case.

Slide hammer kit with 1.25kg sliding weight. Comfortable rubber grip handle for added control. Supplied in storage case with attachments.

Steel shaft hammer with comfortable plastic grip. 2.1kg Sliding weight. Supplied with various attachments.

Manufactured with steel tube and heavy jaw assemblies. Designed to triangulate and strengthen door apertures whilst performing pulling operations. Supplied with tommy bar.

Heavy-duty repair kit for straightening bent chassis and body damage. Variable position upright allows six preset angles of pull plus a seventh upright position. Supplied as standard with manual hydraulic pump and ram.

Reduce your waste disposal costs* - crushing paint cans minimizes the volume of your hazardous waste. Air operated paint can press with safety lock-out device which prevents the door being opened during operation. Bench mounting unit with outlet for waste paint collection. * For 'pay by volume' customers.

Gravity feed spray gun designed for applying base coats. Features air and paint flow controls for fine adjustment of spray pattern. HVLP technology and precision engineering delivers consistent and unrivalled results. Suitable for solvent and water based paints.

Professional gravity feed spray gun with 1mm set-up, ideal for blowing-in small areas of panel where fine control of paint and air is necessary. Features air and paint flow controls for fine adjustment of spray pattern. HVLP technology and precision engineering delivers consistent and unrivalled results. Brass air cap with stainless steel needle and nozzle suitable for solvent and water based paints. Alternative set-up available separately.

Gravity feed spray gun designed for applying clear and base coats. Features air and paint flow controls for fine adjustment of spray pattern with a maximum size of 280mm. HVLP technology and precision engineering delivers consistent and unrivalled results. No rubber O-ring design features non-perishable material for solvent resistance and long-life. Stainless steel fluid passages, needle, nozzle, air cap and air valve suitable for solvent and water based paints.

700W Electric motor provides continuous high volume of air for even paint coverage. Extendable handle and hose storage provides easy manoeuvrability. Suitable for interior and exterior use, applying water and oil based paints, lacquers, preservatives and stains.

Ideal for blowing-in small areas of panel where fine control of paint and air is necessary. Brass air cap with stainless steel needle and nozzle make this HVLP gun suitable for water based paint. Alternative set-up available separately.

Professional gravity feed touch-up spray gun with 0.8mm set-up, ideal for small panels. Brass air cap with stainless steel needle and nozzle suitable for water based paints. Features air and paint flow controls for fine adjustment of spray pattern. Fully polished body resists corrosion and makes for easy cleaning. Alternative set-up available separately.

Round/flat fan control allows spray pattern to be adjusted for any job. 1.7mm Set-up is ideal for applying primers, undercoats and adhesives. Brass air cap with stainless steel needle and nozzle make this HVLP gun suitable for water based paint. Alternative set-ups available separately.

Suitable for applying top coats. Round/flat fan control allows spray pattern to be adjusted for any job. Brass air cap with stainless steel needle and nozzle make this HVLP gun suitable for water based paint. Alternative set-ups available separately.

Ideal for applying high viscosity paints such as primer or undercoat. Round/flat fan control allows spray pattern to be adjusted for any job. Aluminium air cap with stainless steel needle and nozzle make this HVLP gun suitable for water based paint. Alternative set-ups available separately.

Professional gravity feed spray gun with 1.3mm set-up, ideal for applying top coats. Brass air cap with stainless steel needle and nozzle suitable for water based paints. Features air and paint flow controls for fine adjustment of spray pattern. Fully polished body resists corrosion and makes for easy cleaning. Alternative set-ups available separately.

Professional gravity feed spray gun set comprising of Model No's HVLP736 and HVLP746. Brass air cap with stainless steel needle and nozzle suitable for water based paints. Fully polished body resists corrosion and makes for easy cleaning. Alternative set-ups available separately. See model specification for details.

HVLP technology delivers consistent and unrivalled results. Bulk feed system holds up to two litres of paint per fill. This unit is perfectly suited to the commercial refinishing shop. Components of this set are also available separately. Supplied with 1.7mm set-up.

Spray gun head suitable for use with Model No. HVLP-79/P Pressure Pot Spray Gun. 3/8” BSP union fluid hose input connector. 1/4” BSP union air hose input connector. Supplied with 1.7mm set-up.

Hose set suitable for use with Model No. HVLP-79/P and SSG1P Pressure Pot Spray Gun. 1/4” BSP union fitted to both ends of the air hose. 3/8” BSP union fitted to both ends of the fluid hose. Supplied with 1.7mm set-up.

Essential accessory to protect internal parts of air tools from moisture. Compact unit, ideal for fitting directly onto air inlet. Just one of a comprehensive range of quality spray gun accessories.

Designed and developed to assist with any number of small drying processes. Ideal for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying. Supplied with a sturdy 2100mm plated steel stand and a 3m power cable and 3-pin plug.

Designed and developed to assist with any number of small drying processes. Ideal for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying. Supplied with a sturdy 1500mm plated steel stand and 3.7m power cable and 3-pin plug.