Screw-type bridge extractor set. The thin tapered lips on the collets secure a positive grip on the curved surface of the internal bearing bore. Gently removes blind bearings where the use of a slide hammer may damage the surrounding material. Bearing extractor collets with internal capacity from 8 to 27mm.

Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W SMD LED for ease of use at night. Preset the desired psi to begin operation and unit will cut-out automatically once that pressure is reached. Auto-cut-out if hose kinks, to avoid damage to pump.

Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables.

Hydraulic cable oiler, forces oil between inner and outer cables throughout their entire length leaving them silky smooth. For use on brake, throttle, speedo and choke cables for motorcycle, car, bicycle and lawnmowers that require regular oiling as part of their servicing. Easy-to-use and cleaner to service the most popular size cables up to 8mm. Avoids replacing cables that are worn or seized. Results in smooth operating cables.

For easy removal of wheel bearings. Simply choose the correct size collet for the bearing and hammer one of the drifts into the allocated slot. Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/quadbikes.

3-Jaw design applies even pressure preventing damage to bearings. Designed to remove bearings with Ų12-38mm internal diameter. Forged and heat treated steel jaws for greater strength. Corrosion resistant black oxide finish.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 15kg and hanging rack capacity of 10kg.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 18kg and hanging rack capacity of 10kg.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet safe and out of the way when not in use.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet and jacket safe and out of the way when not in use.

Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organise the storage of gloves, clothing, boots and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.

One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilizes a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. As the brake/clutch is bled, the valve prevents the used fluid and air being drawn back into the system.

Small compact kit comprises a selection of essential maintenance tools. Tools feature soft grip handles for comfort and control and are supplied in zip storage case, ideal for storing in a vehicle glove box, under a motorcycle seat, or at home in the drawer.

Multipurpose syringe with synthetic rubber seal, ideal for the transfer of oils/fluids to and from vehicle components. Compact size and flexible extension tube makes it ideal for use on motorcycles. Translucent body allows easy inspection of contents.

Small compact kit comprises a selection of essential sockets and bits for use on motorcycles. Contains socket/bit holder, 3/8"Sq drive sockets and 1/4"Hex JIS, slotted, hex and TRX-Star* bits. Supplied in compact storage case, ideal for stowing under a motorcycle seat.

Compact multi-tool ideal for cyclists and motorcyclists. Eight Total Drive® sockets that fit 28 different sizes of fasteners including Metric, Imperial, Whitworth, TRX-Star* and Spline. Includes 12 1/4"Hex bits and magnetic extension bar/bit holder. Will fit into a pocket, luggage or even under the seat of many motorcycles.

1/2"Sq Drive. H22 53mm long socket. Can be used for removing the front and rear wheels on modern motorbikes with internal Hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

Holds and stores your boots whilst cleaning and drying. Reduces the risk of getting water in them during cleaning. Convenient centre handle for stability and storage of helmet.

Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. Maximum Capacity: Ų1.5mm.

One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small non-return valve and two connector hoses that attach to the scooter or motorcycle bleed nipple. As the brake/clutch is bled the valve prevents the used fluid and air being drawn back into the system.

Must have item when needing to remove fuel tank to perform motorcycle maintenance. Eliminates need to balance fuel tank in an awkward position. Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. Features 1L tank, 950mm hose, two hose clamps and on/off tap. For dual entry carburettor systems, use the Model No. MS029DCK Fuel Feed Lines. Suitable for E10 petrol.

Dual entry carburettor accessory kit for Model No. MS029. Enables MS029 to be fitted to a motorcycle with dual fuel inlets eliminating need to balance fuel tank in an awkward position. Includes 100mm hose, two 200mm hoses, four hose clamps and Y-piece adaptor. Suitable for E10 petrol.