Screw-type bridge extractor set. The thin tapered lips on the collets secure a positive grip on the curved surface of the internal bearing bore. Gently removes blind bearings where the use of a slide hammer may damage the surrounding material. Bearing extractor collets with internal capacity from 8 to 27mm.

Precision machined carburettor jet cleaning and sizing kit. 20 Sizes ranging from 0.45-1.5mm. For classic cars and larger jetted motorcycles. Folding design makes it easy for storage and small enough to carry. May also be used to clean gas jets on welding torches.

Heavy-duty 12mm square link chain, fitted with durable nylon sleeve for avoiding accidental scratching and damage to the bike. Features extra-long 12mm thick shrouded shackle with anti-drill, anti-saw and anti-pick protection on the locking cylinder. Supplied with two keys.

Heavy-duty 10.5mm square link chain, fitted with durable nylon sleeve for avoiding accidental scratching and damage to the bike. Features hardened zinc alloy bodied disc lock with anti-drill, anti-saw and anti-pick protection on the locking cylinder. 4* ART Approval. Supplied with two keys.

Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W SMD LED for ease of use at night. Preset the desired psi to begin operation and unit will cut-out automatically once that pressure is reached. Auto-cut-out if hose kinks, to avoid damage to pump.

Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool at required set size with quick release when finished.

Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables.

Hydraulic cable oiler, forces oil between inner and outer cables throughout their entire length leaving them silky smooth. For use on brake, throttle, speedo and choke cables for motorcycle, car, bicycle and lawnmowers that require regular oiling as part of their servicing. Easy-to-use and cleaner to service the most popular size cables up to 8mm. Avoids replacing cables that are worn or seized. Results in smooth operating cables.

Prevents damage associated with removal of stem bearing. Universal tool works on most steering stem bearings ranging from Ø30-68mm.

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.

Suitable for removing and installing oil filters with diameters ranging from Ø60-84mm. 25mm Wide spring steel band with corrosion resistant coating. PVC dipped multi-position handle can be applied at 180° to the filter. Automatically tightens as pressure is applied.

Professional seal driver shell works with a range of Sealey Fork Seal Driver Sleeves. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Ergonomically designed driver body requires less power and aids accurate operation. Compatible with Model No's MS0531, MS0551, MS0561, MS0581, MS0591 Fork Seal Driver Sleeves.

Aids fast installation of threaded studs without risk of damage to thread. Ideal for engine and exhaust studs. Operate using a 19mm spanner and a 5.5mm hex key.

Professional seal driver sleeve for Ø35-36mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø40-41mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø42-43mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø45-46mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø47-48mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

For easy removal of wheel bearings. Simply choose the correct size collet for the bearing and hammer one of the drifts into the allocated slot. Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/quadbikes.

10mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø12mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø15mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø17mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø19mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø20mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø25mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

3-Jaw design applies even pressure preventing damage to bearings. Designed to remove bearings with Ø12-38mm internal diameter. Forged and heat treated steel jaws for greater strength. Corrosion resistant black oxide finish.

Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. Easy to manoeuvre around the workshop or garage. Front and rear lever operated wedge gates allow for easy loading and unloading to the 2000 x 200 x 50mm (L x W x H) loading track. Includes a 5-position side stand platform to fit varied length side stand, front/rear steel pins to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels.

Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 500kg with weight being dispersed between front and back wheels. Easy to manoeuvre around the workshop or garage. Front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position. Pivoting feature allows flexibility in side stand designs. Side stand holder can be adjusted to cater to the majority of motorbikes.

This motorcycle moving dolly can be used to manoeuvre motorcycles (maximum 300kg dispersed vehicle weight) with centre-stands and is perfect for places where space is restricted. The centre-stand locates on the 4mm thick hardened steel-plate and the 360 degree castors allow the bike to be moved in any direction. Features a foot/hand operated built-in brake mechanism which is ideal for workshop, showroom and home garage use.

Used to check and adjust the alignment of the lasers on Model No. MS070 Motorcycle Wheel Laser Aligner. This unit will allow workshops to check and adjust in-house. Supplied with comprehensive instructions.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 15kg and hanging rack capacity of 10kg.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 18kg and hanging rack capacity of 10kg.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet safe and out of the way when not in use.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet and jacket safe and out of the way when not in use.

Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organise the storage of gloves, clothing, boots and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.

Specially designed spoke wrench with eight interchangeable sized heads. Suitable for adjusting spoke tension and correcting buckled wheels.

CO2 Tyre inflator kit including adaptor for Schrader type valves (used by most cars and motorcycles and some bicycles). Includes 2 x 16g canisters of CO2. Supplied in zipped storage pouch.

One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilizes a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. As the brake/clutch is bled, the valve prevents the used fluid and air being drawn back into the system.