Fully adjustable robust tool for assisting in the successful separation of the engine crankcases to allow access to the crank shaft, connecting rods and other internal components. Suitable for use on a variety of motorcycle and ATV engines. Supplied in storage case.

Small compact kit comprises a selection of essential sockets and bits for use on motorcycles. Contains socket/bit holder, 3/8"Sq drive sockets and 1/4"Hex JIS, slotted, hex and TRX-Star* bits. Supplied in compact storage case, ideal for stowing under a motorcycle seat.

Compact multi-tool ideal for cyclists and motorcyclists. Eight Total Drive® sockets that fit 28 different sizes of fasteners including Metric, Imperial, Whitworth, TRX-Star* and Spline. Includes 12 1/4"Hex bits and magnetic extension bar/bit holder. Will fit into a pocket, luggage or even under the seat of many motorcycles.

Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. Features moulded rubber handle enabling extra grip.

1/2"Sq Drive. H22 53mm long socket. Can be used for removing the front and rear wheels on modern motorbikes with internal Hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

1/2"Sq Drive H24 53mm long socket can be used for removing the front and rear wheels on modern motorbikes with internal hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

Combination hook-end C-Spanner for use with headstock adjustment and rear suspension adjustment. Suitable for a variety of motorcycles. Small End; 36-42mm, Large End; 45-50mm.

Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. Set is also ideal for use on horticultural and agricultural machinery. Includes tools designed for riveting and a plate holder for connecting links accurately. Suitable for use on 520, 525, 530 and 532 chains.

Lightweight and compact waist bag specifically designed for motorcycle users. Made up of large main compartment as well as smaller quick access hook-and-loop pocket and small zipped pocket. Perfect for storing phone, wallet and keys among other items while on the go. Adjustable waist strap. Made from 600D Polyester.

Heavy-duty reinforced zipped tool pouch perfect for taking essential tools on the go. Fitted with an array of storage solutions for any tool you may need. Contains six pockets for items such as spanners as well as seven adjustable hook-and-loop retainers, six elastic retainers and a metal clip for storing a tape measure. Supplied with convenient carry handle.

16-Pocket tool apron perfect for keeping all tools organised and in a reachable location when working at worktable or on a vehicle. Fitted with 16-pockets in varying sizes as well as two loops for use with larger items such as hammers. 2-Way adjustable straps.

Heavy-duty water-resistant canvas tool roll. Ideal for organising tools and taking them on the go. 10-Pockets of various sizes for an array of tools. Fitted with adjustable strap.

Combination fork cap spanner suitable for use on Kayaba, Showa and twin camber forks.

Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Features 10 pullers of which five have double end, giving increased applications. Suitable for most makes of motorcycle. Supplied in storage case.

A comprehensive fork seal driver kit for fork sizes Ø35-50mm. Supplied with six different size plastic adaptors and can be used on both conventional and upside-down forks. Ergonomically designed main driver body for accurate operation using less power.

Useful third hand tool for pulling chain ends together while re-linking. Easy-to-use and suitable for most sizes of chain.

Holds and stores your boots whilst cleaning and drying. Reduces the risk of getting water in them during cleaning. Convenient centre handle for stability and storage of helmet.

Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. Maximum Capacity: Ø1.5mm.

Device designed to stop the over-compression of motorcycle forks whilst in transit. For use on off-road style motorcycles with a minimum front wheel to mudguard clearance of 255mm.

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20 or 24mm lock nuts.

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 24mm lock nuts.

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20mm lock nuts.

Securely holds your motocross bike on to a trailer or van, with the Fast Lock system, no wheel chock or ratchet straps are required. Provided with mounting plates and quick release latches, allowing for fast installation and removal of the clamp. Each mounting plate has a D-ring creating additional anchor points to the trailer floor.

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for all VW Flat-four engine based trikes such as Rewaco, Boom and WK models. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic corners with strap and buckle for easy and secure fitting. Made from Oxford 300D material. Supplied in a storage bag.

Ideal for protection, rain or shine, against weathering and fading. Designed for use on new generation Rewaco RF1, ST, GT, LT and Touring models and Boom Lowrider, Grizzly and Mustang models including Family and Extreme variants. Also suitable for larger custom-built trikes. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the vehicle without the need for mains power supply. Elastic corners with strap and buckle for easy and secure fitting. Made from Oxford 300D material. Supplied in a storage bag.

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for the larger motorbike derived trikes such as Goldwing or Harley Davidson Triglide types. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic corners with strap and buckle for easy and secure fitting. Made from Oxford 300D material. Supplied in a storage bag.

Ideal for protection, rain or shine, against weathering and fading. For smaller motorcycle derived trikes such as Virago or Shadow models or newer reverse trikes with two front wheels. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic corners with strap and buckle for easy and secure fitting. Made from Oxford 300D material. Supplied in a storage bag.

Manual type tyre changer suitable for a wide variety of tyres and wheels including those fitted to motorcycles, ATVs, go-karts and golf buggies. Works on bearing or hub centred wheels and is supplied with two centre posts. Includes manual bead breaker and supplied with tyre bar for mounting and de-mounting. Fast and simple operation. To prevent damage to the rims of alloy wheels, use optional Tyre Bar, Model No. TC963.

Manual bead breaker, especially suitable for motorcycle tyres. Lever action with parallel linkage keeps head at the optimum angle for breaking the bead.

Handlebar tie down clamp used to minimise possible damage to motorcycle handlebars and grips. Provides a secure fixing point to tie down motorcycle whilst in transit.

Manufactured from polyester webbing. Use to either loop or create a slip knot at any appropriate point of the load and then attach to the hook of the strap. Suitable for use on motorcycles or offset loads to help prevent scratches to paint finishes and chrome.

Manufactured from polyester webbing with stitched reinforcement around loops. To be used in conjunction with suitable ratchet tie downs. Suitable for workshop use, to provide safe restraining points for securing motorcycles to a workbench, flat-bed or trailer. Simple cam buckle fastener tensions the webbing to provide superior load restraint.

Manufactured from polyester webbing. Stitched reinforcement at joins and loops. Suitable for workshop use or for securing motorcycle to flat-bed or trailer. Secures rear wheel to anchor point without compressing the suspension units, reducing the risk of seal damage. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism for superior load restraint.

Waterproof document and tool storage tube suitable to mount to motorcycles. Cable ties, mountings and bolt provided. Internal tube length: 320mm. Internal tube diameter: 80mm. Fixing point distance: 315mm.

Composite 100ml collection bottle with magnetic locating pad. Supplied with non-return valve, tubes and connectors.

Simple, one-person operation using standard workshop air supply (90-120psi). Quick, clean and efficient. Does not require specialised brake reservoir caps. Supplied with two bleed lines for twin caliper systems. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.

Composite angled chain brush. Suitable for use on all chain types.

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Clamp screw allows pliers to be fixed into cup of piston for added pulling power.

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation with a self-ratcheting system that allows pliers to automatically lock into cup of piston for added pulling power. Serrated pressure blocks for non-slip operation.

Moulded protectors with connecting cord, designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers.